logoSouthwest Environmental Limited
Environmental Consultancy Services to Industry, Business and Individuals Email Us
London
02076 920 670
Exeter  
01392 927 961
Manchester 
01612 970 026 
Bristol 
01173 270 092 

Unionised Ammonia (NH3) & Effluent Toxicity Calculator

If you are applying for a water discharge permit, assessing trade effluent, or preparing an H1 Risk Assessment, you will often need to convert laboratory Total Ammonia results into toxic Unionised Ammonia (NH3). Use our free calculator below to check your water or effluent sample against UK Environment Agency Environmental Quality Standards (EQS). Not for real world use. For research / educational purposes only.

Unionised Ammonia (NH3) & EQS Toxicity Calculator

Southwest Environmental Ltd
Toxic Unionised Ammonia (NH3-N)
0.0425 mg/L
Equivalent to 0.0517 mg/L expressed as molecular NH3 (42.5 µg/L as N)
Unionised Fraction (f) 1.70%
Dissociation Constant (pKa) 9.564
Ionised Ammonium (NH4+-N) 2.458 mg/L
UK EQS Annual Limit 0.021 mg/L (as N)
Need an EA Permit or H1 Risk Assessment?
SWEL provides rapid Water Quality, H1 Modelling & Nutrient Neutrality reports.
Contact SWEL
Method: Emerson et al. (1975) & Henderson-Hasselbalch (Environment Agency Standard Method). For preliminary screening only.

How to Calculate Unionised Ammonia (NH3) from Total Ammonia

When UK laboratories test river water, package sewage treatment plant effluent, or trade leachate, they usually report Total Ammoniacal Nitrogen (TAN or NH4-N). In water, total ammonia exists in a chemical equilibrium between two species:

Because the ratio between harmless NH4+ and toxic NH3 changes dramatically with water pH and temperature, the Environment Agency (EA), Natural Resources Wales (NRW), and SEPA regulate ecological toxicity using the unionised NH3 concentration.

The Equations Behind the SWEL Calculator

Our calculator combines two fundamental physical chemistry laws:

  1. Temperature-Dependent Dissociation Constant (pKa) – Emerson et al. (1975) / Arrhenius Relationship:
    pKa = 0.09018 + (2729.92 / (T + 273.15)) (where T is water temperature in °C).
  2. Henderson–Hasselbalch Unionised Fraction (f):
    f = 1 / (10^(pKa - pH) + 1)

Crucial Unit Check (NH3-N vs Molecular NH3): A common pitfall in Environmental Permit applications is confusing Unionised Ammonia expressed as Nitrogen (NH3-N) with Unionised Ammonia expressed as the whole molecule (NH3). Because the molecular weight of NH3 is 17.03 g/mol and Nitrogen is 14.01 g/mol, molecular NH3 is 1.2159 times higher than NH3-N. The SWEL calculator above outputs both figures automatically.

UK Environment Agency EQS Thresholds for Unionised Ammonia

Under the Water Framework Directive (WFD) standards and Environment Agency surface water permitting guidance, unionised ammonia is strictly controlled to protect sensitive salmonid (trout and salmon) and cyprinid (coarse) fisheries:

Water Body / Regulatory Standard Limit (mg/L as NH3-N) Limit (µg/L as NH3-N) Compliance Statistic
Freshwater Cyprinid & Salmonid EQS (Chronic) 0.021 mg/L 21 µg/L Annual Mean
Transitional & Coastal Waters EQS 0.021 mg/L 21 µg/L Annual Mean
Freshwater Fisheries Acute Guideline 0.050 mg/L 50 µg/L 95th Percentile

Water Quality & Permitting Consultants

Hopefully by using this page you can rapidly screen your water quality or effluent data. If your undiluted discharge exceeds the 0.021 mg/L threshold and you would like Southwest Environmental to undertake dilution modelling or permitting for you, then please call or email us.

Technical Requirements for Ammonia Risk Assessments and Discharge Permits

When an undiluted effluent sample (such as outflow from a package sewage treatment plant, trade effluent treatment system, or quarry dewatering) exceeds 0.021 mg/L NH3-N, it does not automatically mean a bespoke environmental permit will be refused. The Environmental Quality Standard applies to the receiving watercourse downstream of the mixing zone.

H1 Surface Water Risk Assessment and River Dilution

To demonstrate compliance to the Environment Agency, an impact assessment must model how the discharge mixes with upstream river flow. Using H1 risk assessment methodology, our consultants calculate the resulting downstream concentration using the receiving river's low-flow statistic (Q95), upstream background ammonia concentration, pH, and temperature distribution.

Managing pH and Temperature Sensitivity

Because the Henderson-Hasselbalch relationship is logarithmic, increasing the pH of an effluent or river by 1.0 unit increases the toxic unionised ammonia fraction approximately tenfold. Effective mitigation and engineering controls often include:

Integration with Nutrient Neutrality and Planning

Beyond toxic unionised ammonia impacts on fish, total ammonia contributes directly to total nitrogen loading in sensitive catchments. Discharges near Special Areas of Conservation (SACs), Ramsar sites, or SSSIs frequently require a Habitats Regulation Assessment (HRA) alongside a Nutrient Neutrality Report or Construction Environmental Management Plan (CEMP). With over 900 projects completed across the UK, SWEL provides the technical authority required to clear both planning and permitting hurdles.