Southwest
Environmental Limited| London |
| 02076 920 670 |
| Exeter |
| 01392 927 961 |
| Manchester |
| 01612 970 026 |
| Bristol |
| 01173 270 092 |
Southwest Environmental Limited (SWEL) provides this suite of free online technical calculators for structural engineers, architects, developers, planning consultants, and students. Each tool is designed for rapid preliminary feasibility screening ahead of commissioning formal site investigations or regulatory permitting reports.
Here to help: While these calculators provide instant rule-of-thumb engineering checks, Local Planning Authorities, Building Control, and the Environment Agency require accredited consultancy reports signed off by suitably qualified professionals. Please email us for a fast quotation, or call our regional offices at the top of the page.
Estimate the ultimate and allowable load-bearing capacity (kN/m²) of shallow strip, pad, and raft foundations using soil cohesion (cu), internal friction angle (φ), SPT N-values, unit weight (γ), and foundation geometry.
Bearing capacity is only half the picture on cohesive soils. Calculate ultimate primary consolidation settlement (mm) and how many years 50%, 90%, and 95% settlement will take across UK clay formations (London Clay, Lias Clay, Alluvium, and Glacial Till).
Convert laboratory Total Ammoniacal Nitrogen (TAN / NH4-N) into toxic un-ionised ammonia (NH3-N and molecular NH3) using effluent pH, temperature, and salinity. Automatically checks compliance against the UK Environment Agency 0.021 mg/L chronic EQS threshold.
Calculate Darcy flux, linear porewater seepage velocity, geochemical retardation (Rf), and dispersive plume breakthrough travel times to Controlled Waters receptors (rivers, boreholes, and Source Protection Zones SPZ1/SPZ2).
Calculate full-bore flow velocity, Reynolds number, pipe friction head loss, and manhole/headwall entry and exit shock losses. Checks self-cleansing velocity (0.75–3.0 m/s) and warns when total head loss exceeds available pipe fall (upstream surcharging).
At Southwest Environmental Limited, we believe in sharing open, practical engineering tools. Whether you are a structural engineer cross-checking shallow foundation pressures, an architect checking drainage gradients, or an environmental manager reviewing trade effluent monitoring data, these calculators let you test sensitivity and feasibility in seconds.
When your project moves from initial feasibility to formal planning condition discharge, Building Regulations approval, or Environment Agency permitting, our multi-disciplinary team (FGS / MIEnvSc) has delivered over 900 projects across the UK and can step in to provide the physical site data and accredited reporting you require:
S.D. Content
Environmental & Geotechnical Engineering Consultants
Bristol - 01173 270 092
Exeter - 01398 331 258
London - 02076 920 670